Where incoming water pressure is lower than 30 psi
Product Description
This low flow pump can be added to the RO system to boost pressure of incoming water. The pump needs a TAS-110 transformer to change 110 V to 24 V.
Booster pumps are ideal for houshold use in areas where incoming pressure is always less than 30 psi. This pump is designed for use in any RO system (e.g., ERO-550). It is part of ERO-550P system.
Ports: 3/8"-18 NPT. Bypass: 110 psi. Amp: 1A.
When using this booster pump you need also a tank shut-off switch (Item PSW 350), a transformer (Item TAS-110), a Tee union (Item ATU040404), a Male Elbow (Item JME0406) and Male Connector (Item AMC0406) to change the 3/8' ports to the 1/4" tubes.
This booster pump (50-70 GPD) provides high feed flow into the RO system to optimize the performance. The pump is engineered to accomplish auto suck upon the pressure range 60-100 PSI. All pump components are 100% tested to insure long life. @
Booster pumps are ideal for houshold use in areas where incoming pressure is always less than 30 psi. This pump is designed for use in any RO system (e.g., ERO-550). It is part of ERO-550P system.
Ports: 3/8"-18 NPT. Bypass: 110 psi. Amp: 1A.
When using this booster pump you need also a tank shut-off switch (Item PSW 350), a transformer (Item TAS-110), a Tee union (Item ATU040404), a Male Elbow (Item JME0406) and Male Connector (Item AMC0406) to change the 3/8' ports to the 1/4" tubes.
This booster pump (50-70 GPD) provides high feed flow into the RO system to optimize the performance. The pump is engineered to accomplish auto suck upon the pressure range 60-100 PSI. All pump components are 100% tested to insure long life. @
