Housing for an RO Membrane
Product Description
This 1.8 inch x 12 ich white membrane housing is used for RO membranes in systems sold on this web site (e.g., ERO-550 system).
Membrane housings are manufactured from a high-quality, FDA-approved polypropylene and will accommodate standard 2” x 12” membrane elements. Both the ribbed cap and housing are a one-piece injection molded part. The ribbed cap incorporates double o-rings to ensure a leak-proof seal.
PuroTech reverse osmosis membrane housings have a straight inlet and are equipped with two 90 degree outlets. The 90 degree outlets eliminate the need for additional elbows. All ports have standard 1/8” FNPT connections.
The fittings needed (e.g., Check Valve 1/8" x 1/4" Elbow) for connection with the 1/4" tubes are not included. So you need to order them seperate or use the ones on your old housing.
Membrane housings are manufactured from a high-quality, FDA-approved polypropylene and will accommodate standard 2” x 12” membrane elements. Both the ribbed cap and housing are a one-piece injection molded part. The ribbed cap incorporates double o-rings to ensure a leak-proof seal.
PuroTech reverse osmosis membrane housings have a straight inlet and are equipped with two 90 degree outlets. The 90 degree outlets eliminate the need for additional elbows. All ports have standard 1/8” FNPT connections.
The fittings needed (e.g., Check Valve 1/8" x 1/4" Elbow) for connection with the 1/4" tubes are not included. So you need to order them seperate or use the ones on your old housing.
