Improve the performance of your RO filter
• Aquatic Permeate Pump with Mounting clip
• Compact size
• Quick-Connect 1/4" NPT
• Requires no electricity. , powered by energy from brine water normally lost in the drain. Can be used to replace booster pumps in well water applications.
• NSF approved (Standard 58)
• Ideal For membranes rated from 10 to 100 GPD
• Reduce waste water by as much as 80%
• Improves recovery rates by as much as 400% and increases membrane life
• improves water quality and Prevents "Membrane TDS Creep”
• Effective for inlet water pressure as low as 40 psi
• Fills pressure tank up to 4 times faster under normal use
• Allows greater product tank pressure ( 90% of feed pressure)
• Two year manufacturer’s warranty
The Permeate Pump is powered only by the hydraulic energy of brine water usually lost to the drain. The Permeate Pump forces product water into the storage tank, reducing membrane back pressure and maximizing available feed pressure. These pumps dramatically improve the efficiency of R.O. water production, reducing wastewater by up to 80%. Permeate Pumps can also bring storage tanks up to line pressure and then shut the system down when these tanks reach capacity.
Other benefits include higher delivery pressures, faster R.O. water production, superior water quality, and extended filter/membrane life. The ERP1000 includes a specially designed insert which helps the system operate in near silence, eliminating the occasional clicking or gurgling sounds that can otherwise occur. You can use the ERP500 to upgrade existing R.O. systems.
INSTALLATION DETAILS ARE AVAILABLE AT THE MANUFACTURER'S WEB SITE. IT IS IMPORTANT THAT YOU READ THE INSTRUCTIONS AS YOU HAVE THE OPTION TO REMOVE THE AUTOSHUT-OFF VALVE OR KEEP IT. TO READ THE INSTRUCTIONS, CLICK HERE. FOR FAQ ABOUT PERMEATE PUMPS, CLICK HERE
• Compact size
• Quick-Connect 1/4" NPT
• Requires no electricity. , powered by energy from brine water normally lost in the drain. Can be used to replace booster pumps in well water applications.
• NSF approved (Standard 58)
• Ideal For membranes rated from 10 to 100 GPD
• Reduce waste water by as much as 80%
• Improves recovery rates by as much as 400% and increases membrane life
• improves water quality and Prevents "Membrane TDS Creep”
• Effective for inlet water pressure as low as 40 psi
• Fills pressure tank up to 4 times faster under normal use
• Allows greater product tank pressure ( 90% of feed pressure)
• Two year manufacturer’s warranty
The Permeate Pump is powered only by the hydraulic energy of brine water usually lost to the drain. The Permeate Pump forces product water into the storage tank, reducing membrane back pressure and maximizing available feed pressure. These pumps dramatically improve the efficiency of R.O. water production, reducing wastewater by up to 80%. Permeate Pumps can also bring storage tanks up to line pressure and then shut the system down when these tanks reach capacity.
Other benefits include higher delivery pressures, faster R.O. water production, superior water quality, and extended filter/membrane life. The ERP1000 includes a specially designed insert which helps the system operate in near silence, eliminating the occasional clicking or gurgling sounds that can otherwise occur. You can use the ERP500 to upgrade existing R.O. systems.
INSTALLATION DETAILS ARE AVAILABLE AT THE MANUFACTURER'S WEB SITE. IT IS IMPORTANT THAT YOU READ THE INSTRUCTIONS AS YOU HAVE THE OPTION TO REMOVE THE AUTOSHUT-OFF VALVE OR KEEP IT. TO READ THE INSTRUCTIONS, CLICK HERE. FOR FAQ ABOUT PERMEATE PUMPS, CLICK HERE
