TDS Tester
Product Description
TDS tester is used for measurement of Total Disolved Solids (mg/L) in water. The reading of a water cup will tell how good was the product water out of your RO system. If product water reads high TDS, this means the RO membrane stopped working and it is time to change it.
It has easy-to-read LCD screen. It comes with carrying case
Ideal for residential systems but can be used also for water produced by commercial systems. Accurate due to its advanced microprocessor technology.
Using the Hold Function, it saves measurements for convenient reading and recording.
Using the Auto-off Function, the tester shuts off automatically after 10 minutes of non-use to save batteries.
Measurement range: 0-999 ppm.
Resolution: 1 ppm
Accuracy: +/- 2%
Power source: 2 x 1.5V button cell batteries (included)
Battery life: over 1000 hours
Dimensions: 6.1 x 1.25 x 1 inches
Weight with case: 0.2 lbs
Ideal for residential systems but can be used also for water produced by commercial systems. Accurate due to its advanced microprocessor technology.
Using the Hold Function, it saves measurements for convenient reading and recording.
Using the Auto-off Function, the tester shuts off automatically after 10 minutes of non-use to save batteries.
Measurement range: 0-999 ppm.
Resolution: 1 ppm
Accuracy: +/- 2%
Power source: 2 x 1.5V button cell batteries (included)
Battery life: over 1000 hours
Dimensions: 6.1 x 1.25 x 1 inches
Weight with case: 0.2 lbs
