This PAE RO-132 tank is the best bladder tank on the market for the residential Reverse osmosis system. It is used by many major RO manufacturers including Watts and Eden. It is made of steel with FDC approved Food grade bladder inside. It comes pre-charged with 7 psi of air pressure. When the tank is full, it may reach 45 to 50 psi of pressure depending on your RO system. The water inlet is 1/4" MPT with stainless steel thread. It can be re-pressurized using an air pump through the air valve. The outside volume is 4.4 gallons, but, internally the bladder holds 3.2 gallons. A tank ball valve (not included) makes the connection with 1/4" tubing possible. The tank will accumulate water and provide pressure at the dispensing faucet. The bladder inside the tank will keep the purified water under pressure from the compressed air on the other side of the bladder.
Dimensions: 11" dia x 15" H ; Weight: 8 lbs.
Color: White
Maximum Working Pressure: 70 PSI
The tank is pre-charged at 7 PSI.
Made from FDA listed food-grade materials
(Standard 61 and 58)
Stainless Steel Connector 1/4" NPT
Discharge efficiently in a vertical or horizontal position
Comes with Tank Stand
Side-mounted Air Valve
In the pressure tank, a butyl diaphragm separates the water and air chambers. These materials limit the growth of germs and prevent impurities inside the tank. Diaphragm-type design assures stable water outflow. Metal shell has greater pressure holding capacity than plastic. Metal also eliminates air pressure loss unless the bladder goes bad after long use.
To provide more instant RO water, use a larger tank, or connect several tanks together.
Feedwater pressure:: Tank Total Storage Capacity
40 PSI:: 2.73 gallons
50 PSI:: 3.00 gallons
60 PSI:: 3.21 gallons
80 PSI:: 3.80 gallons
Alt Part No. TKE-3200W