An inline alkaline filter that is 2.0 inch in outside diameter and 10" in length with 1/4” FNPT ports. This filter has a service life of 12 months or 1,000 gallons and a maximum flow rate of 0.7 GPM. The weight of the filter is 10 oz.
The filter contains one medium: magnesium oxide. This media will change filtered water to hydrogen-rich and alkaline water. It will add essential minerals to the water. It will raise the pH of your purified water by at least 2 to 3 points. This filter can be mounted on the side of the under-sink cabinet to filter water from an RO system before the water goes to the faucet. To connect this inline filter to the ¼” tubing, you need two 1/4" Male NPTF Quick Connect fittings (e.g., Male Elbow 1/4"x1/4" QC). For mounting the filter, a single mounting clip 2.0" with a screw can be used.
NO FITTINGS OR CLIPS ARE INCLUDED WITH THE PURCHASE OF THIS FILTER.
Hydrogen-rich alkaline water. Compare with PURETRON T300.
Superior anti-oxidation effect
Essential mineral supplements
Durable and excellent performance
Use Teflon tape on the fittings (7-8 rounds) to make a good seal.
SKU: Hd50-2010-I __ UPC: 85286900XXX